I'm after another Marshall Ambulance body if anyone knows where one's kicking about,
I'm not worried about the doors or windows!..
kind regards
mark ( FLO109)
Marshall Ambulance Body
Re: Marshall Ambulance Body
Hi, try giving Nick Blanchard a ring, I think they still have about 20 left, there's bound to be a spare body kicking about.......
Alec.
Alec.
1972 109 Rover 11 Marshall Ambulance (Camper conversion)
1972 109 LD28 (Quick-change camper and Bothying vehicle!)
1988 RRC 4JB1T (Daily Driver)
Pressure Stove and Lamp fanatic also.
1972 109 LD28 (Quick-change camper and Bothying vehicle!)
1988 RRC 4JB1T (Daily Driver)
Pressure Stove and Lamp fanatic also.
- RMS
- Posts: 2236
- Joined: Wed Feb 15, 2012 12:02 am
- Location: Near Wakefield, UK, in God's own Country!
Re: Marshall Ambulance Body
Yep, that was going to be my suggestion as well.
When Blanchards sell one they offer to remove the body (for a price!), so perhaps they might have one or two in the yard?
Cheers,
Robin.
PS. Mark, did you sort out your cylinder head gasket?
When Blanchards sell one they offer to remove the body (for a price!), so perhaps they might have one or two in the yard?
Cheers,
Robin.
PS. Mark, did you sort out your cylinder head gasket?
1967 109" Carawagon 200TDi
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)
-
- Posts: 80
- Joined: Tue Aug 14, 2012 11:02 am
- Info: 1972 109 LR Marshall Ambulance Camper
- Location: Lincolnshire Wolds
Re: Marshall Ambulance Body
Hi Robin
The engine is now in the scrap yard!....
2 of the hot spots in the head had dropped down into the bores, i've saved the front cover, pump,turbo, manifolds etc,etc i'm post them on the web site if anyone wants them.
The 200tdi, i brought..... took the head off.. new gaskets.. put my spirit level on it, it looked ok..
put it in, changed the oil, plumber rad inn!... bleed pump etc,etc. it started a treat.. no knocks or bangs.. but there water weeping down the side of the block.
That engines out tomorrow, the 300tdi is going in, in the next few days, i'm taking all the wings off for better access welding the 300 engine mounts in, so i'm going to put a defender brake type servo in at the same time,( clutch as well)
We see at the show next saturday....
mark
The engine is now in the scrap yard!....
2 of the hot spots in the head had dropped down into the bores, i've saved the front cover, pump,turbo, manifolds etc,etc i'm post them on the web site if anyone wants them.
The 200tdi, i brought..... took the head off.. new gaskets.. put my spirit level on it, it looked ok..
put it in, changed the oil, plumber rad inn!... bleed pump etc,etc. it started a treat.. no knocks or bangs.. but there water weeping down the side of the block.
That engines out tomorrow, the 300tdi is going in, in the next few days, i'm taking all the wings off for better access welding the 300 engine mounts in, so i'm going to put a defender brake type servo in at the same time,( clutch as well)
We see at the show next saturday....
mark