wanted - dished deluxe bonnet for series 2a/3
wanted - dished deluxe bonnet for series 2a/3
I'm looking for a dished deluxe bonnet complete with spare wheel carrier for my 1971 Dormobile AKM 217K.
Seems there are some military versions of this in the market place but I'm looking for the civilian type which has the bracket for mounting the bonnet catch.
Alternatively I could fit a spare wheel carrier to my existing bonnet if I could find one. Would consider swapping bonnets maybe?
Can any fellow enthusiasts help me with either please?
Seems there are some military versions of this in the market place but I'm looking for the civilian type which has the bracket for mounting the bonnet catch.
Alternatively I could fit a spare wheel carrier to my existing bonnet if I could find one. Would consider swapping bonnets maybe?
Can any fellow enthusiasts help me with either please?
Re: wanted - dished deluxe bonnet for series 2a/3
Chris
I have one but not perfect. It has a couple of rust spots in the frame near the top/front
Where are you ?
I suppose it depends on what your purpose is - replace a razor or to get a near perfect one
I have one but not perfect. It has a couple of rust spots in the frame near the top/front
Where are you ?
I suppose it depends on what your purpose is - replace a razor or to get a near perfect one
Re: wanted - dished deluxe bonnet for series 2a/3
Hi Alex,
Good to hear from you thanks.
I'm in Fyfield Essex CM5 0RB.
Are the rust spots just that or more severe corrosion?
My purpose is to be able to carry a second spare wheel on the bonnet.
A deluxe bonnet is already on my Dormobile but with no spare wheel carrier. I just thought visibility would be better if the spare was a bit lower down on a dished bonnet.
Regards
Chris
Good to hear from you thanks.
I'm in Fyfield Essex CM5 0RB.
Are the rust spots just that or more severe corrosion?
My purpose is to be able to carry a second spare wheel on the bonnet.
A deluxe bonnet is already on my Dormobile but with no spare wheel carrier. I just thought visibility would be better if the spare was a bit lower down on a dished bonnet.
Regards
Chris
Re: wanted - dished deluxe bonnet for series 2a/3
hi Chris
Not too local to me then !
I will try to remember to take a picture and post off to you
Could you message me an email address please? (easier on my phone)
Cheers
Not too local to me then !
I will try to remember to take a picture and post off to you
Could you message me an email address please? (easier on my phone)
Cheers
Re: wanted - dished deluxe bonnet for series 2a/3
Thanks Alex,
Hope you received my PMs but if not just to say I've found a bonnet within 5 miles of my home address so won't need your help after all.
Sorry for any inconvenience my actions may have caused.
With thanks and kind regards
Chris
Hope you received my PMs but if not just to say I've found a bonnet within 5 miles of my home address so won't need your help after all.
Sorry for any inconvenience my actions may have caused.
With thanks and kind regards
Chris
- RMS
- Posts: 2236
- Joined: Wed Feb 15, 2012 12:02 am
- Location: Near Wakefield, UK, in God's own Country!
Re: wanted - dished deluxe bonnet for series 2a/3
Hi Alex,
If the dished bonnet is still up for grabs, can you let me know how much, please?
Cheers,
Robin.
If the dished bonnet is still up for grabs, can you let me know how much, please?
Cheers,
Robin.
1967 109" Carawagon 200TDi
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)
-
- Posts: 395
- Joined: Thu Feb 23, 2012 1:44 pm
- Info: "the pom down under"
- Location: Qld Australia
Re: wanted - dished deluxe bonnet for series 2a/3
RMS wrote:Hi Alex,
If the dished bonnet is still up for grabs, can you let me know how much, please?
Cheers,
Robin.
I've got a rust free one sitting in my shed Robin, free to good home
- RMS
- Posts: 2236
- Joined: Wed Feb 15, 2012 12:02 am
- Location: Near Wakefield, UK, in God's own Country!
Re: wanted - dished deluxe bonnet for series 2a/3
jerryd wrote:RMS wrote:Hi Alex,
If the dished bonnet is still up for grabs, can you let me know how much, please?
Cheers,
Robin.
I've got a rust free one sitting in my shed Robin, free to good home
Nice one,
I'll just fold it up to get it in my suitcase the next time I'm over there
Cheers,
Robin.
1967 109" Carawagon 200TDi
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)
Re: wanted - dished deluxe bonnet for series 2a/3
Robin
Will take some pics and send to you.
I have a lot of pics to take this weekend !!
Will take some pics and send to you.
I have a lot of pics to take this weekend !!
Re: wanted - dished deluxe bonnet for series 2a/3
Robin
I have just dug a couple out and they are both deluxe but non-dished, Sorry for leading you astray !
I have just dug a couple out and they are both deluxe but non-dished, Sorry for leading you astray !