Hi all
Thought this might be of interest to anyone wanting a 3.54 Salisbury to go with their TDi .
http://www.ebay.co.uk/itm/LAND-ROVER-SE ... 3cc751312d
Cheers Mick
3.54 Stage 1 Salisbury axle
-
Jabbawocky
- Posts: 431
- Joined: Mon Feb 20, 2012 10:11 pm
- Info: Barney the Dormobile
- Location: Yorkshire Dales
Re: 3.54 Stage 1 Salisbury axle
As a mention, the Salisbury back-ends are just a narrower version of the American DANA 60 axle. Swapping ratios is easy peasy!
Theres a dearth of information on the net about D60's and I've successfully done two now, without any special casing spreader. Swap with a 110 crownwheel and pinion, the hardest part is shimming the pinion but it's just time consuming rather than complicated!
Happy swapping!
Alec.
Theres a dearth of information on the net about D60's and I've successfully done two now, without any special casing spreader. Swap with a 110 crownwheel and pinion, the hardest part is shimming the pinion but it's just time consuming rather than complicated!
Happy swapping!
Alec.
1972 109 Rover 11 Marshall Ambulance (Camper conversion)
1972 109 LD28 (Quick-change camper and Bothying vehicle!)
1988 RRC 4JB1T (Daily Driver)
Pressure Stove and Lamp fanatic also.
1972 109 LD28 (Quick-change camper and Bothying vehicle!)
1988 RRC 4JB1T (Daily Driver)
Pressure Stove and Lamp fanatic also.
Re: 3.54 Stage 1 Salisbury axle
I have a new (in wooden box) crownwheel for a 3.54 salisbury diff.
I bought it years ago but never used it.
Its just the crown wheel.
Anyone interested?
To infirmary and beyond!